How Much Does a New Garage Door Cost in Australia? 2026 Installed Prices by Type
A garage door is the biggest moving object in most homes — and one of the widest price ranges in home improvement: the same opening can be filled for under $1,000 or beyond $7,000. The difference is door type, material and where in Australia you live. Here are the realistic installed prices for 2026.
In short: Installed, a single roller door commonly costs $1,200–$3,500 and a double roller $2,000–$4,500. Sectional doors — the most popular style — commonly run $2,500–$7,500, while a basic tilt door is the budget option at roughly $800–$1,800.
Installed prices by door type
| Door type | Typical installed cost | Notes |
|---|---|---|
| Tilt / up-and-over | $800 – $1,800 | The cheapest entry point — one solid panel, fewer parts |
| Single roller | $1,200 – $3,500 | Compact curtain roll — good where ceiling space is tight |
| Double roller | $2,000 – $4,500 | Two-car openings, same rolled-curtain principle |
| Sectional | $2,500 – $7,500 | Australia's favourite — panels, insulation and design options push the top end |
Which style actually suits your opening, ceiling and street frontage is a separate decision from budget — our comparison of sectional, roller and tilt doors walks through it room by room. Note the quoted ranges cover the door itself with standard installation; an automatic motor and remote setup is often priced separately — what to ask before choosing an opener.
Why quotes differ so much for the same opening
- Material and finish: Powder-coated steel sits at the affordable end; timber-look laminates, insulated panels and custom colours climb quickly toward the top of each range.
- Where you live: In cyclonic regions of QLD and NT, doors must meet wind-rating specs that commonly add 10–20% to the price — how wind ratings work. In WA and SA, made-to-order parts commonly add cost and lead time too.
- Opening condition: Out-of-square openings, new tracks, structural fixes or removing and disposing of the old door all add labour to the headline price.
- Non-standard sizes: Custom widths and extra-high openings mean made-to-measure curtains or panels rather than stock sizes.
Repair or replace? The quick maths
Before committing to a new door, price the repair: a spring replacement — the most common garage door failure — commonly costs $150–$350 nationally, averaging around $250, with bigger sectional spring jobs at $400–$600. If the door is structurally sound and under 15 years old, a repair usually wins; if panels are rusted, tracks are bent, or you're paying a second repair bill within a year, the money is better put toward replacement. What a technician actually checks is covered in why has your garage door stopped working.
Never DIY the springs: Garage door springs are under enormous tension and injure people every year — spring work belongs to a technician, full stop. The other safety must-haves (auto-reverse, sensor beams) are explained in our garage door safety guide.
Getting quotes that compare fairly
- Ask for an itemised installed price: door, motor, removal of the old door and GST separately.
- Confirm the wind rating in writing if you're anywhere near a cyclonic zone.
- Ask about lead time — made-to-order doors and regional deliveries can take weeks.
- Check what the warranty covers: door panels, springs, and motor usually carry different terms.
The bottom line
Budget from around $1,000 for a basic tilt door to $7,500 for a premium insulated sectional — with cyclone specs and custom sizes pushing further. Get two or three itemised quotes for the same door type, and let the spring-repair maths decide whether replacement is even necessary. Find vetted garage door installers near you here.
Frequently asked questions
In 2026, a single roller door commonly costs $1,200–$3,500 installed and a double roller $2,000–$4,500. Sectional doors commonly run $2,500–$7,500 depending on material and insulation, while basic tilt doors are the cheapest at roughly $800–$1,800.
In cyclonic regions of Queensland and the Northern Territory, doors must meet wind-rating specifications with reinforced curtains, tracks and locking — which commonly adds 10–20% to the installed price. In WA and SA, made-to-order parts commonly add cost and lead time as well.
Price the repair first: spring replacement — the most common failure — commonly costs $150–$350, averaging around $250. If the door is structurally sound, repair usually wins; rusted panels, bent tracks or repeat failures within a year point to replacement being better value.
No — garage door springs are under extreme tension and cause serious injuries when released incorrectly. Spring replacement is a job for a trained technician, and at a common price of $150–$350 it is not worth the risk of doing yourself.